100% disk usage in windows 10 how to solve it how to install it blogspot

how to install it blogspot 100% disk usage in windows 10 how to solve it 
It’s a problem that’s affected users across Windows 7, 8, and 10, and usually stems from one of a number of background processes, all of which we’ve tried to cover here.
Run CheckDisk
The first port of call is to look for corruptions and errors on your hard drive and fix them. The best way to do this is by trying the trusty “chkdsk” tool built into Windows.
1. Click Start, then type cmd , right-click Command Prompt when it appears in the search
results, click “Run as administrator” and hit Enter.
2. In the Command Prompt, type chkdsk /f’ /r C: to check for and automatically fix
errors on your hard drive. (Replace the “C” with whatever letter you’ve assigned your main
Windows hard drive.)
3. You may get a message saying the hard drive is in use and asking if you want to run
CheckDisk when the system restarts. Press “Y” and reboot your PC.
4. CheckDisk will run when you reboot your PC. This process may take a while, so be patient.
Afterwards, your hard drive should be back in good working order, and your disk usage
should be back to normal (around 1-10%).
Disable Windows Services
If that fails, you may need to disable some of those mysterious, cumbersome background
services in Windows.
1. Click Start, type services , then hit Enter.
2. In the Services window find the service called “Superfetch,” right-click it, click Stop, then
open Task Manager to see if your disk usage has dropped. If not, right-click Superfetch and
click Start to get it working again.
3. Try the same thing with the services called “Background Intelligent Transfer Service” and
“Windows Search,” right-clicking them in the Services window, clicking Stop, then seeing
whether the disk usage drops.
4. If your disk usage drops after stopping either service, you’ll have found your culprit and will
want to disable the service permanently. Right-click the service that caused disk usage to
drop when it was stopped, click Properties, then in the “Startup type” drop-down click
Disabled.
Disable Tips About Windows
Still suffering from the dreaded 100% disk usage? Some people have found that turning off
Tips for Windows has helped. Go to “Start -> Settings -> System -> Notification & actions”.
Turn off “Show me tips about Windows.”
Change Pagefile Location
The pagefile is a file on your hard drive that eases the strain put on your RAM when doing
memory-intensive activities on your computer. If your disk usage is constantly high, it could be
because your pagefile is constantly being used to process information on your PC.
One solution would be to buy more RAM. Alternatively, if you have more than one hard drive
in your PC, you can easily move the pagefile to a second non-system hard drive. Your main
hard drive is always working to keep Windows running, so this will help spread the load:
1. Right-click My Computer or This PC, then click Properties.
2. Go to “Advanced system settings -> Settings (under Performance) -> Advanced ->
Change.”
3. With your default pagefile hard drive highlighted, select “No paging file,” then click Set.
4. Next, select your second hard drive where you want the pagefile to be located, then click
“System managed size” -> Set.
5. Click OK and reboot your PC.
100% disk usage in windows 10 how to solve it how to install it blogspot 1
Spread iiQ8